Sorry for my english(I am russian).
Somebody explay me haw play MOO2 1.4 LAN
I have 2 copures in LAN (moo2 win 95 version play ok in LAN)
My steps
1 install Kali , patch 1.4 put autoexec2 and dosxsp1 in to Windows\ system 32( i can ply internet game on 1 computer)
2 instal ipx protocol
3 i run kali ran moo21.4 on bouth computers.
Start network game
but( then i join game on second komputer it not see game in list.
What i must do?
Thank for you answers.
And another problem i have switch and enter internet by city cable network
but when i ran Kali on second PC it says error message what 2 PC uses
same port.
What i must do?
Thank you.
MOO2- the best srategy game in the world).
Play LAN game + 1.4
http://lordbrazen.blogspot.com/2005_01_ ... chive.htmlMoo2v140 LAN games under Windows XP Pro
In order to play LAN games of Master of Orion II v1.40 on Windows XP Pro, you will need to follow the regular Installation on Windows XP instructions. NWLINK IPX/SPX/NetBIOS network protocal will also need to be installed.
After the IPX protocal has been installed, you will need to edit the c:\windows\system32\autoexec2.nt file and change as shown below. The lines in bold will need to be added and the lines referring to Kali should be removed to avoid conflict.
@echo off
REM Load DOS mode CD-ROM support
lh %SystemRoot%\System32\mscdexnt.exe
REM Load DOS mode DPMI support
lh %SystemRoot%\System32\dosx_sp1
REM Set parameters for Sound Blaster Emulation
SET BLASTER=A220 I5 D1 P330 T3
REM Load DOS mode IPX support
lh %SystemRoot%\System32\nw16
lh %SystemRoot%\System32\vwipxspx
posted by Lord Brazen at 10:23 PM
January 18, 2005
--------------------------------------------------------------------------------------------------------------------------------------------------
I hope these instructions will help u.
I guess u r using a router.but when i ran Kali on second PC it says error message what 2 PC uses
same port.
U should give ur PCs fixed IP-Adresses.
Example config :
Code: Select all
kali -PC1- 192.168.0.105 UDP 2213/2213
kali -PC2- 192.168.0.106 UDP 2250/2250
Fill in ur local IP and the port u r using.
In my example PC1 : 192.168.0.105 port2213 / PC2: 192.168.0.106 port2250.
Then goto NAT/proxy, enable speacial NAT/proxy handling and NAT related msges.
Now u should run kali on both PC with 1 internet connection. I tryd it only once, I´m not sure if this is the best configuration, but it workd for me.
I would be gald about a feedback, if it workd etc ... !
Who is online
Users browsing this forum: No registered users and 6 guests